Custom Cabinets & Countertops in Hawthorne, CA

I.OVERVIEW

Paragon Home Services has served Hawthorne homeowners since 2007 — 18+ years of custom cabinets & countertops experience specific to the South Bay's unique construction era, climate, and infrastructure. Every project is managed by licensed, W-2 technicians with the tools and expertise your home deserves.

II.LOCAL CONDITIONS

Why Hawthorne Homes Need Expert Cabinets & Countertops

III.PROCESS

Our Cabinet & Countertop Process

1. 1

   Design and selection — kitchen and bath layout, cabinet brand and style selection, counter material and edge profile, hardware choices.

2. 2

   Measurement and ordering — verified field measurements, cabinet order with appropriate lead time (typically 8–14 weeks for semi-custom, 12–20 weeks for custom).

3. 3

   Existing demo (if applicable) — careful removal of old cabinets and counters to avoid damaging adjacent finishes.

4. 4

   Cabinet installation — laser-leveled, shimmed, and screwed to studs; doors and drawers adjusted at install.

5. 5

   Counter templating — digital laser template after cabinets are set; sent to fabrication shop.

6. 6

   Counter fabrication — slab cut, edge profiled, undermount sink cutouts and faucet holes drilled.

7. 7

   Counter installation — seamed and set with appropriate adhesive; final tooling and polishing.

8. 8

   Final hardware install and walkthrough — pulls, knobs, and door alignment verified.

IV.CAPABILITIES

Cabinet & Countertop Capabilities

• Semi-custom and custom kitchen cabinets
• Bath vanity and built-in cabinetry
• Closet systems and built-ins
• Office and entertainment built-ins
• Inset, full-overlay, and partial-overlay door styles
• Cabinet refacing (door and drawer-front replacement)
• Quartz, quartzite, granite, and marble countertops
• Solid surface and porcelain slab counters
• Butcher block and live-edge wood tops
• Undermount sink installation
• Counter and cabinet repair and refresh
• Hardware selection and installation

V.PARAGON IN HAWTHORNE

Serving All of Hawthorne

VI.FAQ

Cabinets & Countertops — Frequently Asked Questions

What's the difference between custom and semi-custom cabinets?

Semi-custom cabinets come in stocked sizes with limited modifications (depth, width adjustments) and pre-set finish options. Lead time is typically 8–14 weeks. Custom cabinets are built to your exact specifications with any size, finish, and modification — lead time is 12–20 weeks and cost is 30–60% higher. For most kitchens, semi-custom is the right fit; very tight spaces or specific design intent may justify custom.

Quartz vs quartzite — what's the difference?

Despite the similar name, they're completely different. Quartz is engineered stone — natural quartz crystals bound with resin, sold under brand names like Caesarstone and Silestone. Consistent pattern, no sealing needed, very durable. Quartzite is a natural metamorphic stone harder than granite. Beautiful natural pattern, more expensive, and requires sealing. We match the material to your priorities.

Can you reuse my existing cabinet boxes and just replace the doors?

Yes — that's cabinet refacing. If your boxes are sound (plywood construction, square, well-secured), refacing replaces door and drawer fronts and applies a new veneer to box exteriors at roughly 40–60% of the cost of new cabinets. For solid plywood boxes that just look dated, refacing is a strong value play. Particleboard boxes that are sagging or delaminated should be replaced.

How long does a kitchen cabinet and counter project take?

From demo to final install: cabinets typically take 2–4 days to install once delivered, counter templating happens immediately after, and counters are installed 7–14 days after templating. Total from start of demo to functional kitchen is typically 2–4 weeks, not counting the 8–20 week cabinet lead time before demo begins.

VII.CONTINUE

View the full Custom Cabinets & Countertops service page for detailed scope, process, and pricing: