Chimney Sweep & Fireplace Service in Lomita, CA

I.OVERVIEW

Paragon Home Services has served Lomita homeowners since 2007 — 18+ years of chimney sweep & fireplace service experience specific to the South Bay's unique construction era, climate, and infrastructure. Every project is managed by licensed, W-2 technicians with the tools and expertise your home deserves.

II.LOCAL CONDITIONS

Why Lomita Homes Need Expert Chimney & Fireplace

III.PROCESS

Our Chimney Service Process

1. 1

   Initial inspection — Level 1 visual or Level 2 with internal camera, depending on scope and last inspection date.

2. 2

   Sweep — flue and firebox cleaned to remove creosote, soot, and debris; damper checked and lubricated.

3. 3

   Component inspection — cap, crown, flashing, liner, smoke chamber, damper, and firebox documented with photos.

4. 4

   Written report — findings categorized as routine, recommended, or required (safety) repairs, with photos.

5. 5

   Repair execution (as scoped) — cap installation, crown sealing or replacement, flashing repair, liner repair or replacement, smoke chamber parge.

6. 6

   Walkthrough and use guidance — proper fire-building, recommended fuel, and next service date documented.

IV.CAPABILITIES

Chimney & Fireplace Capabilities

• Annual chimney sweep and Level 1 inspection
• Level 2 inspection with internal scope camera
• Chimney cap installation (with spark arrestor)
• Crown repair and replacement
• Flashing repair at roof penetration
• Liner inspection and repair (clay tile and metal)
• Stainless steel liner installation
• Smoke chamber parge and waterproofing
• Damper repair and replacement
• Gas insert and gas log set installation
• Wood-to-gas fireplace conversion
• Fireplace facing and surround restoration

V.PARAGON IN LOMITA

Serving All of Lomita

VI.FAQ

Chimney & Fireplace — Frequently Asked Questions

How often should I have my chimney swept?

NFPA 211 recommends annual inspection regardless of use, with sweeping based on creosote buildup. A wood-burning fireplace used regularly typically needs annual sweeping. A gas-only fireplace needs less frequent sweeping but still benefits from annual inspection of the flue, cap, and damper.

Do I need a Level 2 inspection?

Yes if you're buying or selling the home, after any earthquake or chimney fire, after a flue change (e.g., replacing a furnace), or if your last Level 2 was more than 5 years ago. Level 2 catches structural issues that visual inspection cannot — cracked flue tiles, creosote glaze, and concealed damage.

I want to convert my wood fireplace to gas — what's involved?

Wood-to-gas conversion typically uses a vented gas insert dropped into the existing firebox, with a stainless steel liner run up the existing chimney. Gas is run from the home's supply, the insert is installed and tested, and the surround is finished. Total project is typically 2–4 days. We pull the gas permit and coordinate inspections.

My chimney is leaking — where's the water coming from?

Most chimney leaks come from one of four places: the cap (or missing cap), the crown (cracked or unsealed), the flashing (failed or missing kickout), or the masonry itself (failed mortar joints). A Level 2 inspection identifies the source so the repair targets the actual leak — patching shotgun-style usually doesn't solve it.

VII.CONTINUE

View the full Chimney Sweep & Fireplace Service service page for detailed scope, process, and pricing: