Professional Pressure Washing in Lomita, CA

I.OVERVIEW

Paragon Home Services has served Lomita homeowners since 2007 — 18+ years of professional pressure washing experience specific to the South Bay's unique construction era, climate, and infrastructure. Every project is managed by licensed, W-2 technicians with the tools and expertise your home deserves.

II.LOCAL CONDITIONS

Why Lomita Homes Need Expert Pressure Washing

III.PROCESS

Our Pressure Washing Process

1. 1

   Site walk-through — we identify surfaces, note damage to avoid (loose mortar, painted areas, windows), and confirm scope.

2. 2

   Surface protection — windows, electrical fixtures, and landscaping are protected before any water hits the structure.

3. 3

   Pre-treatment with appropriate detergent — biodegradable cleaning agents matched to the surface type.

4. 4

   Cleaning pass — soft-wash for delicate surfaces, surface cleaner for flatwork, targeted wand work for stains and corners.

5. 5

   Rinse and final pass — full rinse from top down, with attention to any remaining staining.

6. 6

   Walkthrough — you inspect the work before we leave.

IV.CAPABILITIES

Pressure Washing Capabilities

• Concrete and paver driveways
• Patios, walkways, and pool decks
• Stucco soft-wash (full home exterior)
• Roof soft-wash (algae and lichen removal)
• Wood decks and fences (soft-wash with deck-safe cleaner)
• Vinyl and fiber-cement siding
• Garage floors and epoxy coatings
• Outdoor kitchens and BBQ pads
• Commercial storefronts and walkways
• Graffiti removal
• Oil and grease stain treatment (hot-water with degreaser)

V.PARAGON IN LOMITA

Serving All of Lomita

VI.FAQ

Pressure Washing — Frequently Asked Questions

Will pressure washing damage my stucco or paint?

It can — and frequently does — when high pressure is used on the wrong surface. We soft-wash all stucco and painted surfaces under 500 PSI with biodegradable cleaning agents. The chemistry does the work; the water just rinses. Done correctly, soft-wash cleans deeper than high-pressure and leaves the substrate undamaged.

How often should I pressure-wash my driveway?

Most South Bay driveways benefit from a professional cleaning every 12–24 months. Properties under heavy tree canopy or near the beach (where salt residue and algae build up faster) often run on a 12-month cycle. After cleaning, sealing concrete or pavers extends the time between cleanings.

Can you remove oil stains from my driveway?

Most oil stains, yes. We pre-treat with a degreaser, dwell, and then pressure-wash with hot water. Stains that have been sitting for years and soaked deep into the concrete may not come out 100% — a final treatment with a poultice or a stain-blocking sealer evens the surface.

Do I need to be home for the work?

No. We need access to an outdoor water spigot and the area to be cleaned. Most projects complete in a single day — we send before/after photos and an invoice on completion.

VII.CONTINUE

View the full Professional Pressure Washing service page for detailed scope, process, and pricing: