SERVICE AREA · SAN PEDRO

Seasonal Holiday Lighting Install & Removal in San Pedro, CA

Coastal port community with a mix of historic craftsman homes and mid-century construction. Ocean exposure and hillside terrain create unique challenges for exterior and structural work.

LICENSEDBONDEDINSUREDSERVING SAN PEDRO SINCE 200724/7 EMERGENCY

I.OVERVIEW

Paragon Home Services has served San Pedro homeowners since 2007 — 18+ years of seasonal holiday lighting install & removal experience specific to the South Bay's unique construction era, climate, and infrastructure. Every project is managed by licensed, W-2 technicians with the tools and expertise your home deserves.

II.LOCAL CONDITIONS

Why San Pedro Homes Need Expert Holiday Lighting

The San Pedro Challenge

Coastal port community with a mix of historic craftsman homes and mid-century construction. Ocean exposure and hillside terrain create unique challenges for exterior and structural work.

The Paragon Solution

Paragon Home Services has served San Pedro homeowners since 2007 — 18+ years of seasonal holiday lighting install & removal experience specific to the South Bay's unique construction era, climate, and infrastructure challenges. Every project is managed by licensed, W-2 technicians with the tools and expertise your home deserves.

Service area · san-pedro

III.PROCESS

How Holiday Lighting Service Works

1
Design consultation — we walk the property with you, or review photos, to choose rooflines, trees, walkways, and color, and to note power locations.
2
Written proposal — you get a fixed quote covering materials, installation, removal, and optional storage, along with a reserved install window.
3
Installation — our crew uses proper roof safety practices and hangs commercial-grade LED lighting with surface-appropriate clips, with no nails or staples.
4
Power and timer setup — runs are balanced across GFCI-protected outlets, connections are weather-sealed, and timers are set to your schedule.
5
In-season service — if a strand or section goes out during the season, call us and we schedule a service visit.
6
Removal after the holidays — lights come down after New Year's, typically in early January, and clips are removed without marking the house.
7
Labeled storage — fixtures are tested, labeled by location, and stored until next season so reinstallation is faster.

IV.CAPABILITIES

Holiday Lighting Services

Custom display design for your home
Commercial-grade LED roofline and eave lighting
Ridge, peak, and gable outlining
Tree trunk wrapping and canopy lighting
Palm tree lighting
Shrub, hedge, and landscape bed lighting
Walkway and driveway pathway lighting
Wreaths, garland, and entry accent lighting
Warm white, cool white, and multicolor options
Clip-based installation with no nails or staples
GFCI-protected power runs and weather-sealed connections
Timer and photocell setup
In-season service visits for outages
Post-season removal after New Year's
Off-season storage of your fixtures

V.PARAGON IN SAN PEDRO

Serving All of San Pedro

Neighborhoods: a coastal port community on the Palos Verdes Peninsula with hillside neighborhoods and ocean views

ZIP codes served: 90731, 90732, 90733

Fully Licensed & Insured · Fully Licensed & Insured

Established 2007 — 18+ years South Bay experience

24/7 emergency response

VI.FAQ

Holiday Lighting — Frequently Asked Questions

How much does professional holiday light installation cost?: In the South Bay, professional installation and removal for a typical single-family roofline usually falls between about $800 and $3,000. Larger homes with multiple stories, trees, and landscape lighting can run $3,000–$6,000 or more. The biggest factors are the linear feet of roofline, roof pitch and height, roof material, how many trees are wrapped and how tall they are, and whether you rent the lights or buy them. Storage is an optional add-on. Paragon gives you a fixed quote after a design walk-through or a photo review.
When should I book holiday lighting installation?: Book as early as you can. Holiday lighting crews schedule installs on a first-come basis, and the weeks before Thanksgiving and the first half of December fill up fast. Booking in September or October gets you the widest choice of install dates, and many homeowners have lights up in mid-to-late November so they're on for Thanksgiving weekend. If you have fixtures in storage with us from last season, reinstallation is faster, but it still needs a reserved date. Call (310) 406-6675 to check open install windows.
Will installing holiday lights damage my roof or gutters?: Not when it's done correctly. Most roof and fascia damage from holiday lights comes from nails, staples, and screws that leave holes for water to get in, or from people walking on tile roofs without the right footing. Paragon installs with clips made for each surface: gutter clips, shingle tabs, and ridge and tile clips. Everything comes off cleanly at removal. Our crews follow roof safety practices and take extra care on the clay and concrete tile roofs common across the South Bay, where a misplaced step can crack a tile.
When do you take down Christmas lights?: Removal typically happens after New Year's, with most takedowns scheduled in the first few weeks of January. We set your removal date when you book, so you don't have to call and ask. If you want lights left up for a later event or taken down earlier, just tell us. During removal, the crew takes every clip off, checks each strand, labels it by location, and either leaves the fixtures with you or takes them to storage for next season, depending on your plan.
Can you store my holiday lights until next year?: Yes. Off-season storage is part of our holiday lighting service. After removal, fixtures are tested, damaged sections are noted, and every strand is labeled by where it goes on your home, whether that's the front roofline, the garage peak, or the oak by the driveway. Everything is kept together until the next season. Because the lights are already cut and fitted to your home, the next install goes faster, and you don't have boxes of tangled strands taking up space in the garage.
Do you use LED lights, and will they overload my outlets?: Yes, we use commercial-grade LED lighting. LEDs draw far less power than incandescent strings, so a full display usually runs from the existing exterior outlets. Before installing, we map each run to the outdoor circuit it will use and keep every run within that circuit's capacity. All power goes through GFCI-protected outlets with weather-sealed connections. If a design needs more power than the home's exterior outlets can supply, we'll tell you up front and can scope an added outdoor circuit with a licensed electrician.

VII.CONTINUE

View the full Seasonal Holiday Lighting Install & Removal service page for detailed scope, process, and pricing:

Seasonal Holiday Lighting Install & Removal — Full Service Page

More Services in San Pedro

Free Estimate (310) 406-6675

Why San Pedro Homes Need Expert Holiday Lighting

The San Pedro Challenge

Coastal port community with a mix of historic craftsman homes and mid-century construction. Ocean exposure and hillside terrain create unique challenges for exterior and structural work.

The Paragon Solution

Paragon Home Services has served San Pedro homeowners since 2007 — 18+ years of seasonal holiday lighting install & removal experience specific to the South Bay's unique construction era, climate, and infrastructure challenges. Every project is managed by licensed, W-2 technicians with the tools and expertise your home deserves.

Service area · san-pedro

How Holiday Lighting Service Works

Design consultation — we walk the property with you, or review photos, to choose rooflines, trees, walkways, and color, and to note power locations.

Written proposal — you get a fixed quote covering materials, installation, removal, and optional storage, along with a reserved install window.

Installation — our crew uses proper roof safety practices and hangs commercial-grade LED lighting with surface-appropriate clips, with no nails or staples.

Power and timer setup — runs are balanced across GFCI-protected outlets, connections are weather-sealed, and timers are set to your schedule.

In-season service — if a strand or section goes out during the season, call us and we schedule a service visit.

Removal after the holidays — lights come down after New Year's, typically in early January, and clips are removed without marking the house.

Labeled storage — fixtures are tested, labeled by location, and stored until next season so reinstallation is faster.

Holiday Lighting Services

Custom display design for your home

Commercial-grade LED roofline and eave lighting

Ridge, peak, and gable outlining

Tree trunk wrapping and canopy lighting

Palm tree lighting

Shrub, hedge, and landscape bed lighting

Walkway and driveway pathway lighting

Wreaths, garland, and entry accent lighting

Warm white, cool white, and multicolor options

Clip-based installation with no nails or staples

GFCI-protected power runs and weather-sealed connections

Timer and photocell setup

In-season service visits for outages

Post-season removal after New Year's

Off-season storage of your fixtures

Holiday Lighting — Frequently Asked Questions

How much does professional holiday light installation cost?

In the South Bay, professional installation and removal for a typical single-family roofline usually falls between about $800 and $3,000. Larger homes with multiple stories, trees, and landscape lighting can run $3,000–$6,000 or more. The biggest factors are the linear feet of roofline, roof pitch and height, roof material, how many trees are wrapped and how tall they are, and whether you rent the lights or buy them. Storage is an optional add-on. Paragon gives you a fixed quote after a design walk-through or a photo review.

When should I book holiday lighting installation?

Book as early as you can. Holiday lighting crews schedule installs on a first-come basis, and the weeks before Thanksgiving and the first half of December fill up fast. Booking in September or October gets you the widest choice of install dates, and many homeowners have lights up in mid-to-late November so they're on for Thanksgiving weekend. If you have fixtures in storage with us from last season, reinstallation is faster, but it still needs a reserved date. Call (310) 406-6675 to check open install windows.

Will installing holiday lights damage my roof or gutters?

Not when it's done correctly. Most roof and fascia damage from holiday lights comes from nails, staples, and screws that leave holes for water to get in, or from people walking on tile roofs without the right footing. Paragon installs with clips made for each surface: gutter clips, shingle tabs, and ridge and tile clips. Everything comes off cleanly at removal. Our crews follow roof safety practices and take extra care on the clay and concrete tile roofs common across the South Bay, where a misplaced step can crack a tile.

When do you take down Christmas lights?

Removal typically happens after New Year's, with most takedowns scheduled in the first few weeks of January. We set your removal date when you book, so you don't have to call and ask. If you want lights left up for a later event or taken down earlier, just tell us. During removal, the crew takes every clip off, checks each strand, labels it by location, and either leaves the fixtures with you or takes them to storage for next season, depending on your plan.

Can you store my holiday lights until next year?

Yes. Off-season storage is part of our holiday lighting service. After removal, fixtures are tested, damaged sections are noted, and every strand is labeled by where it goes on your home, whether that's the front roofline, the garage peak, or the oak by the driveway. Everything is kept together until the next season. Because the lights are already cut and fitted to your home, the next install goes faster, and you don't have boxes of tangled strands taking up space in the garage.

Do you use LED lights, and will they overload my outlets?

Yes, we use commercial-grade LED lighting. LEDs draw far less power than incandescent strings, so a full display usually runs from the existing exterior outlets. Before installing, we map each run to the outdoor circuit it will use and keep every run within that circuit's capacity. All power goes through GFCI-protected outlets with weather-sealed connections. If a design needs more power than the home's exterior outlets can supply, we'll tell you up front and can scope an added outdoor circuit with a licensed electrician.